ไทย
H. Pattanarungruang Company Limited is an expert in designing and manufacturing pressure tanks and water pumps under the brand “Hydroline” solely. and is also an importer of pressure tanks from various brands such as pressure tanks, water pumps, brand LITSON 500 liters, imported from Turkey l HRR and in the production part The products also meet international standards and are managed systematically. Thus making business operations efficient. and complies with ISO 9001 : 2015 standards
Standard Model LITSON “Pressure Diaphragm Tank”
Specification
- 500 Litres
- Max. Pressure 10 Bar
- Pre Charge Pressure 4
- Dimension D(mm) 750 x H(mm) 1550
- Connection 1 1/4″
External material
- Made from sheet steel
- red glaze
Inside material
- Inside the tank is a diaphragm rubber filling made from a single piece of natural rubber filling. Can be removed and replaced
type
- The tank has a vertical shape and is machined with standard strength. and coated with paint Can be used with all types of water or water that is highly corrosive.
- Imported from Turkey
- Bucket with rubber filling Can hold more pressure than a pressure tank without a rubber filling.
- The rubber filling is made from a single piece of natural rubber. Can be removed and replaced
Type of use
- Installed for use in conjunction with Booster Pump, pumps and various accessories for use with residences, tall buildings or areas that need to use a large amount of water.
- Additional system to increase water pressure
- Residential and commercial water supply systems
- irrigation system
- Fire water supply system
Product warranty
- 1 year
Suggestions on checking and taking care of equipment
- Check the Start-Stop operation of the pump system. How much is the pressure?
- Close valve No.1 and then open valve No.2 to completely drain out the water in the pressure tank.
- Always check the air inside the pressure tank every 3 months to keep the values inside the pressure tank the same. and does not cause problems to the system
- If the value read from the tire pressure measuring device The reading is much lower than the starting point. Add more air. But if there is more than the Start point, remove the air.
- Use a tool to measure the air in general car tires. To measure the air in the tank at the air filling valve. If a large amount of water comes out while pressing indicates that the diaphragm rubber filling may be damaged.
- If you find that you have encountered a problem that cannot be fixed by yourself, such as a tank with a leak, a broken rubber filling, or other damaged locations. You should consult with Expert team to receive immediate corrections
