ไทย
H. Pattanarungruang Company Limited is an expert in designing and producing pressure tanks, galvanized water pumps, brand HYDROLINE BEV 200 liters, under the sole brand “ Hydroline ”. Products meet international standards and are managed systematically. Thus making business operations efficient. and complies with ISO 9001 : 2015 standards
Standard Model HYDROLINE “Pressure Tank Galvanized ”
Specification
- 200 Litres
- Precharge Pressure (PSI) 70-100
- Max. Working Pressure (PSI) 150
- Dimension D(mm) 495 x H(mm) 1412
- Connection 1 1/2″-1 1/2″
External material
- Galvanized
- Zinc goes through the process of plating the steel surface.
type
- Pressure tanks, water pumps, tanks have a vertical shape and are machined with standard strength. and coated with paint Can be used with all types of water or water that is highly corrosive.
- Factory produced tanks There is complete separation between air and water.
- The pump and accessories can be mounted directly to the tank.
- It can be assembled economically and quickly.
Type of use
- Installed for use in conjunction with Booster Pump, pumps and various accessories for use with residences, tall buildings or areas that need to use a large amount of water.
- Additional system to increase water pressure
- Residential and commercial water supply systems
- irrigation system
- Fire water supply system
- HVAC supports expansion
Usage limitations
- Temperature 5-90 c
- Maximum pressure is 10 bar.
Recommended information
- Calculation and determination of capacity of pressure tanks and water pumps depends on water pressure, tripping pressure and effective water reserve volume. (See the catalog for calculation information)
- A larger tank will have a greater amount of water stored between high and low pressure. which means You will have enough water. before the pump starts working larger tank It will help the pump turn on and off cycle for a long time. and work longer This will increase the life of the pump.
- Ps = Start up pressure – (Pump Start) / Ps = Shut off pressure – (Pump Start)
- Ps = starting pressure (Pump starts working)
- Ps = maximum pressure required When the flow is stopped (Pump stops working)
Product warranty
- 1 year
Suggestions on checking and taking care of equipment
- Check the Start-Stop of the pump system to see if How much is the pressure?
- Close valve No.1 and then open valve No.2 to completely drain out the water in the pressure tank.
- Always check the air inside the pressure tank every 3 months to keep the values inside the pressure tank the same. and does not cause problems to the system
- If the value read from the tire pressure measuring device The reading is much lower than the starting point. Add more air. But if there is more than the Start point, remove the air.
- Use a tool to measure the air in general car tires. To measure the air in the tank at the air filling valve. If a large amount of water comes out while pressing indicates that the diaphragm rubber filling may be damaged.
- If you find that you have encountered a problem that cannot be fixed by yourself, such as a tank with a leak, a broken rubber filling, or other damaged locations. You should consult with Expert team to receive immediate corrections
