Standard Model : Fire Pump Horizontal split case pump
Specification
- Inquire at after sales service
Type of use
- This type of pump is suitable for small to large pumping volumes (about 500-5000 GPM) and should be used in cases where the water level in the clarifier is higher than the pump In case it is unavoidable a priming tank is installed to ensure that the firepump can be pumped at all times Horizontal split casepumps have an open top casing for easy repair Maintenance without pulling out the engine Because the suction side and the send side of this type of pump are designed to be on the side and opposite each other The suction side of the pump is a double suction type The water entering the suction pipe is divided into 2 entrances on both sides of the impeller which can balance the load of the impeller well.
Component
-
The casing is made of cast iron the working pressure is in bars the top cover can be opened to repair and maintain the pump easily.
-
Bearing (bearings) are Ball Bearing type there are 2 sets located at the head and end of the pump.
-
Seal This type of fire pump has two packing seals located at the head and the end of the pump.
Product Warranty
- Inquire at after sales service