Standard Model : Fire Pump Motor
Specification
-
After-sales Service
Type of use
-
This type of fire pump is suitable for installation in the case where the water tank is located below the level of the pump we can design a multi-stage fire pump (Mulit-stage) in case a single propeller cannot make the head as required when ordering this type of pump you must first know the depth of the underground water tank to notify the length of the TPL (Total Pipe Length) of the pump to the manufacturer to prepare according to the specified length when installing column blow Impeller and stainer will be installed inside the underground well with a discharge head consisting of supply flange packing seal and coupling set are mounted on the well opening when selecting a diesel engine as an output power a right angle gear must be installed when changing the pump drive power perpendicular to the engine
-
The firepump is driven by a motor to pumpwater into the fire hose system which walks along various points within the building or factory which are ready to use the pressure of the water inside the pipe all the time when using water to extinguish fires or it is necessary to use water pressure when the water is turned on the water pressure in the system will drop to the set point for the machine to work (Cut In) the pressure switch (Pressure Switch) in the control cabinet will send a signal to the pumps to work by ordering the waterpump to maintain the pressure (Jockeypump) to work first until it decreases to the value that set the machine to stop working (Cut Out) Pressure Switch (Pressure Switch) of the pump to maintain pressure will stop working automatically but if the pressure in the system continues to drop due to constant use of water the pressure switch in the main controller will order the firepump to fire working and pumping water into the system to increase the pressure of the water in the system until the pressure in the system is stable the excess pressure will be released through the pressure relief valve (Main Relief Valve) and when you want to stop the machine firepump must press the stop button on the main control cabinet the fire pump will stop working and ready to work again when the pressure drops again
Component
- After-sales Service
Product warranty
- After-sales Service
