H. Pattanarungruang Company Limited is an expert in the design and production of Air Tanks under the brand “ Hydroline ” solely. And we also accept production of pressure tanks, Special Tanks, and diaphragm tanks according to the desired size. Products meet international standards and are managed systematically. Thus making business operations efficient. and complies with ISO 9001 : 2015 standards
Standard Model HYDROLINE “Air Tank”
External material
- Air tank uses special thick steel. Become stronger
- Used to store air
- Self-produced, self-controlled, with standard certification
- Use special thick steel Become stronger
- Use internal welding. with expert technicians
- Tested before sending, has standards
- Can be produced both vertically and horizontally.
- Coated with Epoxy to prevent rust.
- Use the paint spray room system that meets standards
- Other colors can be made according to the needs of the organization.
- Products produced from the Hydroline factory.
type
- The Air Tank has a vertical or horizontal shape. and is molded with strength according to standards and coated with paint Coated with Epoxy to prevent rust.
- Can be used with all types of water or water that is highly corrosive.
- Air Tank, air tank produced from the factory. There is complete separation between air and water.
- The pump and accessories can be mounted directly to the tank.
- It can be assembled economically and quickly.
Type of use
- Installed for use in conjunction with Booster Pump, pumps and various accessories for use with residences, tall buildings or areas that need to use a large amount of water.
- Additional system to increase water pressure
- Residential and commercial water supply systems
- irrigation system
- Fire water supply system
- HVAC supports expansion
Recommended information
- Calculation. Determination of tank capacity. It depends on the water pressure, tripping pressure and effective water reserve. (See the catalog for calculation information)
- A larger tank will have a greater amount of water stored between high and low pressure. which means You will have enough water. before the pump starts working larger tank It will help the pump turn on and off cycle for a long time. and work longer This will increase the life of the pump.
- Ps = Start up pressure – (Pump Start) / Ps = Shut off pressure – (Pump Start)
- Ps = starting pressure (Pump starts working)
- Ps = maximum pressure required When the flow is stopped (Pump stops working)
Product warranty
- 1 year
Suggestions on checking and taking care of equipment
- Check the Start-Stop operation of the pump system. How much is the pressure?
- Close valve No.1 and then open valve No.2 to completely drain out the water in the pressure tank.
- Always check the air inside the pressure tank every 3 months to keep the values inside the pressure tank the same. and does not cause problems to the system
- If the value read from the tire pressure measuring device The reading is much lower than the starting point. Add more air. But if there is more than the Start point, remove the air.
- Use a tool to measure the air in general car tires. To measure the air in the tank at the air filling valve. If a large amount of water comes out while pressing indicates that the diaphragm rubber filling may be damaged.
- If you find that you have encountered a problem that cannot be fixed by yourself, such as a tank with a leak, a broken rubber filling, or other damaged locations. You should consult with Expert team to receive immediate corrections