What features does a Hydroline water pump pressure tank have? to make us the country’s leading manufacturing leader our production facilities are certified to ISO 9001 : 2015 and have received numerous certifications let’s see today until it’s just one bucket what do you start with?
Features of 1 piece Hydroline water pump pressure tank we produce water pump pressure tanks for operators to use according to their properties, in most cases, the use of one tank has a long service life If properly maintained and check regularly today let’s look at the features from this article.
Exterior material
- Made from SPHC sheet steel.
- Blue glaze.
Inner material
- Inside the tank is a diaphragm filament made from a single piece of natural rubber filament. can be replaced And there is air filling into the tank to start the pump, how many bars to start and how many bars to cut off. In most cases, it is based on the Start pressure and will be set below 3-5 PSI.
Type
- The hull is vertically shaped and molded with strength as standard. and color plating Can be used with all types of water or very corrosive water.
- bucket with rubber filling Can hold more pressure than a pressure tank without filling.
- The filling is made from a single piece of natural rubber can be replaced.
- The filling has a solid mounting point.
- factory-made tanks It has complete separation between air and water.
- The pump and accessories can be mounted directly to the tank.
- Quick and economical assembly.
Type of use
- Install applications in conjunction with Booster Pumps, pumps and various accessories. Use with residences, high-rise buildings or areas that require a lot of water use.
- Additional system to increase water pressure.
- Residential and commercial water supply systems.
- Irrigation system.
- Fire water supply system.
- HVAC supports expansion.
Restrictions on use
- Temperature 5-90 c.
- The maximum pressure is 10 bar.
Introduction
- Calculation Determination of the capacity of the tank depending on water pressure tripping pressure and effective water reserve (See the calculation data in the catalog).
- The larger the tank the more water is stored during high and low pressures which means you will have enough water before the pump starts larger tank It allows the pump to turn on and off for a long time and work longer this will increase the service life of the pump.
- Ps = Start up pressure – (Pump Start) / Ps = Shut off pressure – (Pump Start).
- Ps = Starting pressure (Pump starts working).
- Ps = maximum pressure required when the flow is stopped (Pump stops working).